Image: www.stanleywindowcare.com |
Clean The Paneling
First and foremost, the biggest thing that you should do in order to help with getting more output from your panels is simple, clean them. Hiring a professional can help you with the output because the panels themselves could pick up a lot of dust, dirt, grime, and even bird droppings. Any element that sits on the panel face, could block the UV rays which are needed to convert energy properly. Cleaning can add a great deal of energy to the grid, and it should not be neglected.
Simple Washing Technique
You don’t always need to hire a professional to help with washing panels. You can easily move forward with doing it yourself. Assuming that you just have light dust and grime, you could use glass cleaning solution to get this started. Just remember, you cannot use water alone, and you cannot clean without getting every spec away from the panel’s glass façade. Leaving any debris, spots, or streaks will diminish the results that you get on your panels.
Using a pure water system could work, as this is fed through a specific installation that is meant to clean paneling. However, not everyone can go forward with this solution. When in doubt, you may need to hire a professional to get to the panels and clean them with specialized tools. Again, it’s imperative that you have your panels checked out, cleaned, and completely free of debris and dust. The older your panels are, the higher the chances are that you are not getting the optimal ratio of energy conversion from the sun. If you want to double your output, simply get the panels cleaned and watch the savings roll in.
No comments:
Post a Comment